Supplies for Getting Started in Stained Glass Part 2 of 2

This list is meant to help create a shopping list for the beginning stained glass art student. Not all of the items will be needed for every project, for instance you will use either lead cames OR copper foil and their corresponding accessories depending on the stained glass style you will be working with. Other tools listed may be very helpful, but not entirely necessary, one pair of pliers may be enough to do several jobs for example.

Lead Cames- The original choice in stained glass support systems. These come as long strips of lead with grooves or channels on either one side or both, depending on whether it is to be used as an inside or outer edge piece of the stained glass.

Lead Vise- Holds the lead came in place to allow it to be stretched before use.

Lead Cutters- Also known as lead pliers these snips are especially helpful when cutting cames for use in the corners of your stained glass project.

Lead Knife- Can be used to make clean straight cuts on lead cames.

Horseshoe Nails- Great for holding frames in place when assembling your stained glass project.

Dustpan and Brush- Helps to keep your workplace clean which is important in making stained glass projects because debris will prevent things from sticking properly.

Safety Goggles- Keeps pieces of lead or glass from damaging the eyes during cutting, always remember " safety first" !

Wooden Block Holder- Can be helpful for holding pieces of stained glass.

Masking Tape- Always handy in the workshop; may be used to hold pattern pieces together or many other uses.

Picture Hanging Wire or Other Fasteners- For hanging your completed stained glass project.

Lead Board with Right Angle Support- Useful in holding a lead stained glass project in place during assembly while keeping the edges clean and straight.

Wood or Plastic Fid- Great as a burnishing or spreading tool when applying foil to stained glass.

Glazing Cement- Seals and strengthens the joint areas of the lead cames.

Whiting- Helps to dry and set the glazing cement. Can also be used to remove excess putty from the stained glass.

Stiff Bristle Brush- Used for applying glazing cement.

Patina- Liquid solution that changes the appearance of solder, can give a more antiqued appearance.

Rubber Gloves- Absolutely necessary when applying patina or any other solvents to the project; you do not want these penetrating your skin!

Mirror Sealer- This aerosol spray is used on the back of mirrors to keep the reflective coating from being scratched or damaged.

Finishing Compound- Provides the finishing touch to your stained glass project, adding polish and shine while providing a protective finish to help prevent oxidation and tarnish buildup.

Pushpins, Tacks and Jig Material- Items that may be helpful in holding certain pieces together while assembling your stained glass project.

Craft Knife- Perfect for correcting small errors in copper foiling and other small tasks.

Steel Wool- May remove oxidized material from solder and other metal parts.

Plastic Basin and Sponge- With warm soapy water to clean glass and metal debris from your stained glass workspace.

Carbon Paper- For making pattern copies.

Tracing Paper- For tracing the original design unto a clean copy.

Rubber Cement- For holding pattern pieces on glass to make cutting them out easier.

Pens, Pencils, Markers and Colored Pencils- Needed for drawing and coloring in pattern pieces.

There you have it, a not-so-condensed shopping list to get you on your way to a new hobby in stained glass art making!

< Back To Stained Glass Next Previous